STEVEB-Dist-Mgr v0.04 Perl 5 v5.18.4 x86_64-linux-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
STEVEB-Dist-Mgr v0.04
- Platform
- Perl 5 v5.18.4 x86_64-linux-thread-multi
- Date
- 2020-12-24 16:03:52
- ID
- 9de54198-4601-11eb-84bc-edd243e66a77
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear STEVEB,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.18.4/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing STEVEB::Dist::Mgr 0.04, Module 5.018004, /home/cpan/pit/thr/perl-5.18.4/bin/perl
t/00-load.t ................... ok
Is a directory at t/lib/Helper.pm line 49.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 1.
t/05-bump_version.t ...........
Dubious, test returned 21 (wstat 5376, 0x1500)
All 1 subtests passed
t/10-get_version_info.t ....... ok
Is a directory at t/lib/Helper.pm line 45.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 2.
t/15-add_repo_add_bugtrack.t ..
Dubious, test returned 21 (wstat 5376, 0x1500)
All 2 subtests passed
Is a directory at t/lib/Helper.pm line 42.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 2.
t/20-ci_config_files.t ........
Dubious, test returned 21 (wstat 5376, 0x1500)
All 2 subtests passed
Is a directory at t/lib/Helper.pm line 49.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 1.
t/25-ci_badges.t ..............
Dubious, test returned 21 (wstat 5376, 0x1500)
All 1 subtests passed
No such file or directory at /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/lib/STEVEB/Dist/Mgr.pm line 367.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 2.
t/30-manifest_skip.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
All 2 subtests passed
No such file or directory at /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/lib/STEVEB/Dist/Mgr.pm line 272.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 2.
t/35-git_ignore.t .............
Dubious, test returned 2 (wstat 512, 0x200)
All 2 subtests passed
# Failed test 'in proper directory ok'
# at t/40-remove_unwanted_files.t line 34.
# '/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04'
# doesn't match '(?^:steveb-dist-mgr)'
No such file or directory at t/40-remove_unwanted_files.t line 36.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 3.
t/40-remove_unwanted_files.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/3 subtests
# Failed test '...and error is sane'
# at t/45-init.t line 39.
# 'init() requires 'modules' in the parameter hash at t/45-init.t line 36.
# '
# doesn't match '(?^:Can't run init\(\))'
# Failed test 'back in root directory ok'
# at t/45-init.t line 133.
# '/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04'
# doesn't match '(?^:steveb-dist-mgr)'
# Failed test 'in proper directory ok'
# at t/45-init.t line 117.
# '/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04'
# doesn't match '(?^:steveb-dist-mgr)'
No such file or directory at t/45-init.t line 119.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 6.
t/45-init.t ...................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/6 subtests
# Failed test 'in proper directory ok'
# at t/50-full_run.t line 48.
# '/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04'
# doesn't match '(?^:steveb-dist-mgr)'
No such file or directory at t/50-full_run.t line 50.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 3.
t/50-full_run.t ...............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/3 subtests
t/manifest.t .................. skipped: Author tests not required for installation
t/pod-coverage.t .............. skipped: Author tests not required for installation
t/pod.t ....................... skipped: Author tests not required for installation
Test Summary Report
-------------------
t/05-bump_version.t (Wstat: 5376 Tests: 1 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/15-add_repo_add_bugtrack.t (Wstat: 5376 Tests: 2 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/20-ci_config_files.t (Wstat: 5376 Tests: 2 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/25-ci_badges.t (Wstat: 5376 Tests: 1 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/30-manifest_skip.t (Wstat: 512 Tests: 2 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/35-git_ignore.t (Wstat: 512 Tests: 2 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/40-remove_unwanted_files.t (Wstat: 512 Tests: 3 Failed: 1)
Failed test: 3
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/45-init.t (Wstat: 512 Tests: 6 Failed: 3)
Failed tests: 4-6
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/50-full_run.t (Wstat: 512 Tests: 3 Failed: 1)
Failed test: 3
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=14, Tests=39, 2 wallclock secs ( 0.03 usr 0.03 sys + 1.15 cusr 0.23 csys = 1.44 CPU)
Result: FAIL
Failed 9/14 test programs. 5/39 subtests failed.
make: *** [Makefile:879: test_dynamic] Error 255
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
File::Find::Rule 0.34 0
File::Path 2.18 0
Hook::Output::Tiny 1.00 1.00
Module::Starter 1.77 0
PPI 1.270 0
Test::More 1.302183 0
Tie::File 0.99 0
version 0.9928 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280235
ExtUtils::Command 7.56
ExtUtils::Install 2.18
ExtUtils::MakeMaker 7.56
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302183
Test::Harness 3.42
Test::More 1.302183
version 0.9928
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/F6lIFGJW1B/lib/perl5:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 1625773
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.18.4
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/F6lIFGJW1B
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/F6lIFGJW1B"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/F6lIFGJW1B
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.18.4/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 4) configuration:
Platform:
osname=linux, osvers=5.4.0-26-generic, archname=x86_64-linux-thread-multi
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.18.4 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.92
Built under linux
Compiled at Apr 27 2020 20:10:56
%ENV:
PERL5LIB="/home/cpan/pit/jail/F6lIFGJW1B/lib/perl5:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="1625773"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.18.4"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/F6lIFGJW1B"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/F6lIFGJW1B""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/F6lIFGJW1B"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/F6lIFGJW1B/lib/perl5/5.18.4/x86_64-linux-thread-multi
/home/cpan/pit/jail/F6lIFGJW1B/lib/perl5/5.18.4
/home/cpan/pit/jail/F6lIFGJW1B/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/F6lIFGJW1B/lib/perl5
/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/lib
/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Mll_F70tFA/STEVEB-Dist-Mgr-0.04/blib/arch
/home/cpan/pit/thr/perl-5.18.4/lib/site_perl/5.18.4/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.18.4/lib/site_perl/5.18.4
/home/cpan/pit/thr/perl-5.18.4/lib/5.18.4/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.18.4/lib/5.18.4
.