STEVEB-Dist-Mgr v0.01 Perl 5 v5.32.0 amd64-freebsd-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
STEVEB-Dist-Mgr v0.01
- Platform
- Perl 5 v5.32.0 amd64-freebsd-thread-multi
- Date
- 2020-12-24 07:27:36
- ID
- 7ec81ce2-45b9-11eb-84bc-edd243e66a77
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear STEVEB,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/thr/perl-5.32.0/bin/perl5.32.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing STEVEB::Dist::Mgr 0.01, Module 5.032000, /usr/home/cpan/pit/thr/perl-5.32.0/bin/perl5.32.0
t/00-load.t .............. ok
# Failed test 'proper warning count ok'
# at t/05-bump_version.t line 57.
# got: '0'
# expected: '2'
# Failed test '...and warning is sane'
# at t/05-bump_version.t line 61.
# undef
# doesn't match '(?^:No\.pm: Can't find a \$V)'
# Failed test '...and warning is sane'
# at t/05-bump_version.t line 62.
# undef
# doesn't match '(?^:Bad\.pm: Can't find a valid)'
# Failed test 'One has proper from ver'
# at t/05-bump_version.t line 64.
# got: undef
# expected: '0.01'
# Failed test 'One has proper to ver'
# at t/05-bump_version.t line 65.
# got: undef
# expected: '3.77'
# Failed test 'One has dry_run set ok'
# at t/05-bump_version.t line 66.
# got: undef
# expected: '1'
# Failed test 'Two has proper from ver'
# at t/05-bump_version.t line 68.
# got: undef
# expected: '2.00'
# Failed test 'Two has proper to ver'
# at t/05-bump_version.t line 69.
# got: undef
# expected: '3.77'
# Failed test 'Two has dry_run set ok'
# at t/05-bump_version.t line 70.
# got: undef
# expected: '1'
# Failed test 'Three has proper from ver'
# at t/05-bump_version.t line 72.
# got: undef
# expected: '3.00'
# Failed test 'Three has proper to ver'
# at t/05-bump_version.t line 73.
# got: undef
# expected: '3.77'
# Failed test 'Three has dry_run set ok'
# at t/05-bump_version.t line 74.
# got: undef
# expected: '1'
# Failed test 'Proper key count for t/data/work/Three.pm'
# at t/05-bump_version.t line 77.
# got: '0'
# expected: '4'
# Failed test 'Proper key count for t/data/work/Two.pm'
# at t/05-bump_version.t line 77.
# got: '0'
# expected: '4'
# Failed test 'Proper key count for t/data/work/One.pm'
# at t/05-bump_version.t line 77.
# got: '0'
# expected: '4'
# Failed test 'proper warning count ok'
# at t/05-bump_version.t line 91.
# got: '0'
# expected: '2'
# Failed test '...and warning is sane'
# at t/05-bump_version.t line 93.
# undef
# doesn't match '(?^:No\.pm: Can't find a \$V)'
# Failed test '...and warning is sane'
# at t/05-bump_version.t line 94.
# undef
# doesn't match '(?^:Bad\.pm: Can't find a valid)'
# Failed test 'One has proper from ver'
# at t/05-bump_version.t line 96.
# got: undef
# expected: '0.01'
# Failed test 'One has proper to ver'
# at t/05-bump_version.t line 97.
# got: undef
# expected: '3.77'
# Failed test 'Two has proper from ver'
# at t/05-bump_version.t line 99.
# got: undef
# expected: '2.00'
# Failed test 'Two has proper to ver'
# at t/05-bump_version.t line 100.
# got: undef
# expected: '3.77'
# Failed test 'Three has proper from ver'
# at t/05-bump_version.t line 102.
# got: undef
# expected: '3.00'
# Failed test 'Three has proper to ver'
# at t/05-bump_version.t line 103.
# got: undef
# expected: '3.77'
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 20 just after 33.
t/05-bump_version.t ......
Dubious, test returned 20 (wstat 5120, 0x1400)
Failed 24/33 subtests
Can't locate Module/Installed.pm in @INC (you may need to install the Module::Installed module) (@INC contains: /usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/arch /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0/amd64-freebsd-thread-multi /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0/amd64-freebsd-thread-multi /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0 /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/amd64-freebsd-thread-multi /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0/amd64-freebsd-thread-multi /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0 /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/amd64-freebsd-thread-multi /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5 /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0/amd64-freebsd-thread-multi /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0 /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/amd64-freebsd-thread-multi /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5 /usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/lib /usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/arch /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0 /usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0/amd64-freebsd-thread-multi /usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0 .) at t/10-get_version_info.t line 8.
BEGIN failed--compilation aborted at t/10-get_version_info.t line 8.
t/10-get_version_info.t ..
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/manifest.t ............. skipped: Author tests not required for installation
t/pod-coverage.t ......... skipped: Author tests not required for installation
t/pod.t .................. skipped: Author tests not required for installation
Test Summary Report
-------------------
t/05-bump_version.t (Wstat: 5120 Tests: 33 Failed: 24)
Failed tests: 9, 11-33
Non-zero exit status: 20
Parse errors: No plan found in TAP output
t/10-get_version_info.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=6, Tests=34, 1 wallclock secs ( 0.06 usr 0.03 sys + 1.13 cusr 0.53 csys = 1.76 CPU)
Result: FAIL
Failed 2/6 test programs. 24/34 subtests failed.
*** Error code 255
Stop.
make: stopped in /usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Module::Installed
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'STEVEB (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Module::Installed' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
File::Find::Rule 0.34 0
Hook::Output::Tiny 1.00 1.00
PPI 1.270 0
Test::More 1.302183 0
version 0.9928 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.78
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.50
ExtUtils::Install 2.18
ExtUtils::MakeMaker 7.50
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.40
File::Spec 3.78
Module::Build 0.4231
Pod::Parser 0
Pod::Simple 3.40
Test2 1.302183
Test::Harness 3.42
Test::More 1.302183
version 0.9928
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 35124
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.32.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/0nzTJK1ntZ
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/0nzTJK1ntZ"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/0nzTJK1ntZ
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.32.0/bin/perl5.32.0
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 32 subversion 0) configuration:
Platform:
osname=freebsd
osvers=12.2-release
archname=amd64-freebsd-thread-multi
uname='freebsd fforc 12.2-release freebsd 12.2-release r366954 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.32.0 -Dusethreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
optimize='-O2'
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='FreeBSD Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags ='-pthread -Wl,-E -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /usr/lib/clang/10.0.1/lib /usr/lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil
perllibs=-lpthread -ldl -lm -lcrypt -lutil
libc=
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags=' '
cccdlflags='-DPIC -fPIC'
lddlflags='-shared -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under freebsd
Compiled at Oct 31 2020 05:47:36
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="35124"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.32.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/0nzTJK1ntZ"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/0nzTJK1ntZ""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/0nzTJK1ntZ"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/5.32.0
/usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5/amd64-freebsd-thread-multi
/usr/home/cpan/pit/jail/0nzTJK1ntZ/lib/perl5
/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/jOyF9SkcMO/STEVEB-Dist-Mgr-0.01/blib/arch
/usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0
/usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0