STEVEB-Dist-Mgr v0.04 Perl 5 v5.20.0 x86_64-linux
- Status
- Fail
- From
- Slaven Rezić
- Dist
-
STEVEB-Dist-Mgr v0.04
- Platform
- Perl 5 v5.20.0 x86_64-linux
- Date
- 2020-12-24 11:50:23
- ID
- 34d5f24c-45de-11eb-afad-778b1f24ea8f
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Steve Bertrand,
This is a computer-generated report for STEVEB-Dist-Mgr-0.04
on perl 5.20.0, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/opt/perl-5.20.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing STEVEB::Dist::Mgr 0.04, Module 5.020000, /opt/perl-5.20.0/bin/perl
t/00-load.t ................... ok
Is a directory at t/lib/Helper.pm line 49.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 1.
t/05-bump_version.t ...........
Dubious, test returned 21 (wstat 5376, 0x1500)
All 1 subtests passed
t/10-get_version_info.t ....... ok
Is a directory at t/lib/Helper.pm line 45.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 2.
t/15-add_repo_add_bugtrack.t ..
Dubious, test returned 21 (wstat 5376, 0x1500)
All 2 subtests passed
Is a directory at t/lib/Helper.pm line 42.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 2.
t/20-ci_config_files.t ........
Dubious, test returned 21 (wstat 5376, 0x1500)
All 2 subtests passed
Is a directory at t/lib/Helper.pm line 49.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 21 just after 1.
t/25-ci_badges.t ..............
Dubious, test returned 21 (wstat 5376, 0x1500)
All 1 subtests passed
No such file or directory at /home/cpansand/.cpan/build/2020122406/STEVEB-Dist-Mgr-0.04-0/blib/lib/STEVEB/Dist/Mgr.pm line 367.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 2.
t/30-manifest_skip.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
All 2 subtests passed
No such file or directory at /home/cpansand/.cpan/build/2020122406/STEVEB-Dist-Mgr-0.04-0/blib/lib/STEVEB/Dist/Mgr.pm line 272.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 2.
t/35-git_ignore.t .............
Dubious, test returned 2 (wstat 512, 0x200)
All 2 subtests passed
# Failed test 'in proper directory ok'
# at t/40-remove_unwanted_files.t line 34.
# '/home/cpansand/.cpan/build/2020122406/STEVEB-Dist-Mgr-0.04-0'
# doesn't match '(?^:steveb-dist-mgr)'
No such file or directory at t/40-remove_unwanted_files.t line 36.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 3.
t/40-remove_unwanted_files.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/3 subtests
# Failed test '...and error is sane'
# at t/45-init.t line 39.
# 'init() requires 'modules' in the parameter hash at t/45-init.t line 36.
# '
# doesn't match '(?^:Can't run init\(\))'
# Failed test 'back in root directory ok'
# at t/45-init.t line 133.
# '/home/cpansand/.cpan/build/2020122406/STEVEB-Dist-Mgr-0.04-0'
# doesn't match '(?^:steveb-dist-mgr)'
# Failed test 'in proper directory ok'
# at t/45-init.t line 117.
# '/home/cpansand/.cpan/build/2020122406/STEVEB-Dist-Mgr-0.04-0'
# doesn't match '(?^:steveb-dist-mgr)'
No such file or directory at t/45-init.t line 119.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 6.
t/45-init.t ...................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/6 subtests
# Failed test 'in proper directory ok'
# at t/50-full_run.t line 48.
# '/home/cpansand/.cpan/build/2020122406/STEVEB-Dist-Mgr-0.04-0'
# doesn't match '(?^:steveb-dist-mgr)'
No such file or directory at t/50-full_run.t line 50.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 3.
t/50-full_run.t ...............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/3 subtests
t/manifest.t .................. skipped: Author tests not required for installation
t/pod-coverage.t .............. skipped: Author tests not required for installation
t/pod.t ....................... skipped: Author tests not required for installation
Test Summary Report
-------------------
t/05-bump_version.t (Wstat: 5376 Tests: 1 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/15-add_repo_add_bugtrack.t (Wstat: 5376 Tests: 2 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/20-ci_config_files.t (Wstat: 5376 Tests: 2 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/25-ci_badges.t (Wstat: 5376 Tests: 1 Failed: 0)
Non-zero exit status: 21
Parse errors: No plan found in TAP output
t/30-manifest_skip.t (Wstat: 512 Tests: 2 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/35-git_ignore.t (Wstat: 512 Tests: 2 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/40-remove_unwanted_files.t (Wstat: 512 Tests: 3 Failed: 1)
Failed test: 3
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/45-init.t (Wstat: 512 Tests: 6 Failed: 3)
Failed tests: 4-6
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/50-full_run.t (Wstat: 512 Tests: 3 Failed: 1)
Failed test: 3
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=14, Tests=39, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.75 cusr 0.21 csys = 1.00 CPU)
Result: FAIL
Failed 9/14 test programs. 5/39 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ----- --------
File::Find::Rule 0 0.34
File::Path 0 2.12
Module::Starter 0 1.77
perl 5.010 5.020000
PPI 0 1.220
Tie::File 0 1.00
version 0 0.9917
build_requires:
Module Need Have
------------------- ----- --------
Hook::Output::Tiny 1.00 1.00
Test::More 0 1.302056
configure_requires:
Module Need Have
------------------- ----- --------
ExtUtils::MakeMaker 0 7.24
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = en_US.UTF-8
LANGUAGE = en_US:en
LC_ALL = en_US.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/cpansand/bin/linux-gnu:/home/cpansand/bin/sh:/home/cpansand/bin:/usr/games:/home/cpansand/devel:/home/eserte/src/srezic-misc/scripts
PERL5LIB = /home/cpansand/.cpan/build/2020122406/Module-Starter-1.77-0/blib/arch:/home/cpansand/.cpan/build/2020122406/Module-Starter-1.77-0/blib/lib:/home/cpansand/.cpan/build/2020122406/Hook-Output-Tiny-1.00-0/blib/arch:/home/cpansand/.cpan/build/2020122406/Hook-Output-Tiny-1.00-0/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 10316
PERL5_CPAN_IS_RUNNING = 10316
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 10202,10316
PERLDOC = -MPod::Perldoc::ToTextOverstrike
PERL_BATCH = yes
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_CPAN_REPORTER_CONFIG = /var/tmp/cpansmoker-1023/2020122406/cpanreporter_000_config.ini
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/zsh
TERM = screen
TMPDIR = /var/tmp/cpansmoker-1023/2020122406
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl-5.20.0/bin/perl
$UID/$EUID = 1023 / 1023
$GID = 1023 1023
$EGID = 1023 1023
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.16
CPAN::Meta 2.150010
Cwd 3.62
ExtUtils::CBuilder 0.280216
ExtUtils::Command 7.24
ExtUtils::Install 1.67
ExtUtils::MakeMaker 7.24
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.24
File::Spec 3.62
JSON 2.90
JSON::PP 2.27400
Module::Build 0.4220
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.30
Test::More 1.302056
YAML 1.17
YAML::Syck 1.29
version 0.9917
--
Summary of my perl5 (revision 5 version 20 subversion 0) configuration:
Platform:
osname=linux, osvers=3.2.0-4-amd64, archname=x86_64-linux
uname='linux cvrsnica-wheezy 3.2.0-4-amd64 #1 smp debian 3.2.54-2 x86_64 gnulinux '
config_args='-ds -e -Dprefix=/opt/perl-5.20.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.7.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.7/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.13.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.13'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Jul 19 2014 07:43:18
%ENV:
PERL5LIB="/home/cpansand/.cpan/build/2020122406/Module-Starter-1.77-0/blib/arch:/home/cpansand/.cpan/build/2020122406/Module-Starter-1.77-0/blib/lib:/home/cpansand/.cpan/build/2020122406/Hook-Output-Tiny-1.00-0/blib/arch:/home/cpansand/.cpan/build/2020122406/Hook-Output-Tiny-1.00-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="10316"
PERL5_CPAN_IS_RUNNING="10316"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="10202,10316"
PERLDOC="-MPod::Perldoc::ToTextOverstrike"
PERL_BATCH="yes"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_CPAN_REPORTER_CONFIG="/var/tmp/cpansmoker-1023/2020122406/cpanreporter_000_config.ini"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpansand/.cpan/build/2020122406/Module-Starter-1.77-0/blib/arch
/home/cpansand/.cpan/build/2020122406/Module-Starter-1.77-0/blib/lib
/home/cpansand/.cpan/build/2020122406/Hook-Output-Tiny-1.00-0/blib/arch
/home/cpansand/.cpan/build/2020122406/Hook-Output-Tiny-1.00-0/blib/lib
/opt/perl-5.20.0/lib/site_perl/5.20.0/x86_64-linux
/opt/perl-5.20.0/lib/site_perl/5.20.0
/opt/perl-5.20.0/lib/5.20.0/x86_64-linux
/opt/perl-5.20.0/lib/5.20.0
.